|
About Us
- Home
Page - Events Guide - Insurance
- Laws - Products
& Accessories |
||||||||
|
Performance cams mean extra power for Evolution engines. Hydraulic lifters are capable of 6000+ rpm with stock springs and no valve float. |
||||||||
|
Part No. |
GRIND | TIMING | @.53 | @.020 | LIFT |
LIFT TDC |
SPRINGS | APPLICATION |
| 114-46 | EV13 |
15/31 45/13 |
226 238 |
270 280 |
.485 .495 |
.161 .148 |
STOCK |
Bolt-in street/touring cam for heavy bikes.
Much more mid-range and upper power than either stock cam.
$125.00 |
| 114-52 | EV27 |
20/36 44/16 |
236 240 |
270 274 |
.495 .495 |
.182 .166 |
STOCK |
Bolt-in street cam with fast open and close
ramps. Similar timing to EV3 but designed to produce a very broad torque
band. Pulls 1500 to 6000 rpm.
$125.00 |
| 114-27 | EV3 |
21/37 43/15 |
238 238 |
280 280 |
.495 .495 |
.197 .159 |
STOCK |
Bolt-in stree cam for light bikes (FXRS,
etc.). Lots more mid-range and upper end power. Smooth idle, 6000 rpm cam
with stock heads & springs
$125.00 |
| 114-48 | EV46 |
25/41 49/17 |
246 246 |
283 283 |
.495 .495 |
.207 .197 |
STOCK |
Bolt-in performance cam with fast open &
close ramps. Longer duration than EV3 but higher static compression pressure
for 6000+ rpm.
$125.00 |
| 114-56* | EV23 |
10/30 40/8 |
220 228 |
.498 .498 |
.134 .121 |
STOCK |
NEW. Bolt-in intended for use in 80" Big
Twin. Crisp throttle response and strong pulling power from 1500 to 6000
rpm. Excellent cam for heavy touring bikes and high geared bikes. Also works
well in higher altitudes.
$125.00 |
|
| 114-47 | EV38 |
21/37 52/20 |
238 252 |
280 295 |
.495 500 |
.197 .182 |
STOCK |
Combination grind for light bikes with great
mid range & high end power. Long exhaust duration tends to reduce Oil
temperature in hot weather.
$125.00 |
| 114-55 | EV51 |
28/44 54/22 |
252 256 |
286 290 |
.510 .510 |
.233 .195 |
STOCK |
Easy installation with longer duration for
modified street engines with hyd. lifters. Power range from 3000 - 6500 rpm.
$125.00 |
| 114.53 | EV59 |
26/46 56/24 |
256 260 |
290 394 |
.560 .560 |
.236 .208 |
Hi-Lift |
Fast ramps for modified 80 to 88 inch motors.
Use AP springs & collars. Very broad power band; 6000 rpm. OK for hyd.
lifters.
$125.00 |
| 114.54 | EV72 |
30/54 60/28 |
264 268 |
298 302 |
.560 .560 |
.246 .230 |
Hi-Lift |
For 92 in. + street motors. Use AP springs
& titanium collars. Very broad power band; 2800 - 6000 rpm. OK for hyd
lifters.
$125.00 |
| * Timing listed at .053 cam lift. | ||||||||
|
[ TOP ] |
||||||||
ANDREWS
CAMS
