|
About Us
- Home
Page - Events Guide - Insurance
- Laws - Products
& Accessories |
|||||||
|
|
|||||||
|
Duration @ .053" OPEN/CLOSE |
GROSS VALVE LIFT | ||||||
|
Part No. |
YEAR | SERIES & GRIND NO. | INT. | EXH. | INT. | EXH. | APPLICATION |
| 114-150 | 1984/Later |
Hydraulic Fireball 300-2B |
226 12/34 |
236 41/15 |
.490 | .490 |
HYD.BOLT-IN Designed for broad pwer range.
Good Choice for heavy bikes with heavy load. Increases low and mid range
performance. Works well with stock compression ratio and stock exhaust. Ho
valve spring change required. basic rpm idle - 4000.
$130.00 Qty: |
| 114-182 | 1984/Later |
Hydraulic Fireball 310-2 |
236 16/40 |
242 43/19 |
.490 | .490 |
HYD. BOLT-IN Street performance for heavier
bikes that are slightly modified. Can be used with stk. compression or
increased up to 9:5:1. Complements exhaust & intake modifications. No
valve spring change required. Basic rpm 1500 - 4500.
$130.00 Qty:
|
| 114-180 | 1984/Later |
Hydraulic Fireball 316-2B |
242 19/43 |
252 48/24 |
.490 | .490 |
HYD. BOLT-IN Designed for speed our touring.
Works well with engine modifications. Works best with 9:5:1 compression
ratio. Can be used with stock compression in lighter bikes. Early Evolutions
that do not have notched pistons must be checked for valve-to-piston
clearance. Basic rpm 2000 - 5000
$130.00 |
| 114-181 | 1984/Later |
Hydraulic Fireball 326-2 |
252 24/48 |
262 57/25 |
.490 | .500 |
HYD. Performance cam. Mid range & upper
rpm improvement. Works best with 10:1 compression ratio. Works well with
performance car & exhaust. Excellent or modified touring bikes. May
require valve spring change. Check all clearances. Basic rpm 2500 - 55--.
$130.00 |
| 114-144 | 1984/Later |
Hydraulic Hi-Roller H286-2 |
242 19/43 |
252 48/24 |
.490 | .490 |
HYD. BOLT-IN Designed for speed or touring.
works well with engine modifications. Can be used with stk. compression for
touring. Works best with 9:5:1 comp. ratio. Does not require valve spring
change. Early Evolutions that do not have notched pistons must be checkd for
valve to piston clearance. Basic rpm 2000 - 5000.
$165.00 |
| 114-145 |
Hydraulic Hi-Roller H296-2 |
252 24/48 |
262 57/25 |
.490 | .500 |
HYD. Performance cam. Mid range & upper
rpm improvement. Works best with 10:1 compression ratio, performance carb
& exhaust. Excellent for modified touring bikes. May require valve
spring change. Check all clearances. Basic rpm 2500 - 5500.
$130.00 |
|
| 114-146 | 1984/Later |
Hydraulic Hi-Roller H306-2 |
262 28/54 |
272 69/23 |
.500 | .510 |
HYD. Performance cam. Mid range & upper
rpm power. Works best with 10:5:1 compression ration. Can be used with stk.
heads. Clearancing & valve spring change required. Excellent stroker
cam. Basic rpm 3000 - 6000.
$130.00 |
| 114-151 | 1984/Later |
Hydraulic Hi-Roller H310-2 |
266 23/63 |
276 68/28 |
.550 | .550 |
HYD. Performance e cam. Designed for large
C.I. & increased compression ratios. Street-strip type performance. 88
C.I., 10:5:1 compression ratio & up. Heads must be clearanced & have
performance valve springs installed. Basic rpm depends on the combination,
approximately 3000 - 6500 rpm.
$165.00 |
| 114-183 | 1984/Later |
Hydraulic Hi-Roller H290-2 |
240 17/43 |
248 45/23 |
.581 | .581 |
HYD. Performance cam. Designed for stk. C.I.
Evolutions that have increased compression and/or performance head work.
Must have the heads clearanced for 581 lift. Will produce strong low &
mid range power with appropriate intake, heads & exhaust. Up to 88 C. I.
Basic rpm depends on the combination, approximately 1800-5200 rpm
$170.00 |
| 114-184 | 1984/Later |
Hydraulic Hi-Roller h304-2 |
254 24/50 |
260 55/25 |
.600 | .600 |
HYD. Performance cam. Designed for
higher compression and/or increased C.I. Evolutions that have performance
heads. Clearancing & valve spring change required for .600 lift. Will
produce strong mid range power in a stk. C.I. bike or a broad range in
larger C.I. bikes. Basic rpm depends on the combination, approximately 2500
- 5800.
$170.00 |
| 114-185 | 1984/Later |
Hydraulic Hi-Roller H314-2 |
260 26/54 |
266 65/21 |
.600 | .600 |
HYD. Performance cam. Stree-strip
performance for large C.I. bikes with performance heads. Produces broad pwer
range. Clearancing & valve spring change required for .600 lief. Basic
rpm 2800 - 6000.
$170.00 |
| * Timing listed at .053 cam lift. | |||||||
|
[ TOP ] |
|||||||
CRANE
CAMS FOR EVOLUTIONR
BIG TWIN - 1984 & LATER
