Slik Stand Motorcycle Stand

About Us - Home Page - Events Guide - Insurance - Laws - Products & Accessories
Bikes for Sale - Mileage Guide - Bar Guide - Tattoos - "Trailer Trash" Dave" - Guestbook
Bulletin Board - Free Classifieds - Links - Policies

At Last! a safe, simple, secure way to haul your motorcycle in a pickup or on or inside a trailer.  Whether you own a Harley or any other brand of motor cycle, you need a "Slik Stand" to haul your bike.  

(Click Here to Order)

Simply bolt the "Slik Stand" to the floor of the vehicle with 2 bolts, roll your bike onto the "shoe" and attach tie-downs to the cross bar and to the handle bars.  Then haul your motorcycle to where the fun is!

There is no need to have tie downs hooked everywhere on the bike or vehicle.

An optional rear "shoe is offered if the rear wheel "hops" or moves around.  One bolt is all that is needed to secure it to the floor of the vehicle.

The "Slik Stand is easy to assemble for use. Simply place the crossbar on the ground with end holes up and place the "shoe" onto the center of it.  Align the holes in the crossbar with the holes in the shoe and insert the 2 bolts provided and install and tighten nuts.  For easy storage, simply remove the bolts and store behind pickup seat, on the garage wall or any other convenient location.

Once the "Slik Stand" is bolted to a pickup, trailer or garage floor you can easily lock your motorcycle to it by running a chain or cable through the loop welded on the front of the "shoe" and the wheel of the motorcycle.

(Click Here to Order)

The "Slik Stand" makes a great work tool!  Use it to hold your bike upright and stable for simple maintenance or major repairs.  Attach either wheel of your bike to the "Slik Stand" and the end of the motorcycle not attached can be raised as need by jacking or any other safe means of lifting.  This allows for removal of the front or rear wheel, forks, motor or any other part of the bike.  Use it in the garage, the driveway, or anywhere else that you want to stabilize your bike.

Talk about stable!  This biker weighs over 200 pounds.  Slik Stand is attached to the rear and the front end is jacked up.

Jacked up and ready to remove rear wheel to replace tire.  Slik Stand does it again!

(Click Here to Order)

Copyright © 2000 DreamRiter Productions/Amazing Products.  All Rights Reserved.